Yealink W65P Guide

Handset registration

Handset registration is usually done automatically upon power up. To perform handset registration manually follow these steps:

1. Do one of the following to register your handset manually:
   
   • Long press on the base station till the registration LED slow flashes. Then press the OK key to enter the main menu on the handset, select Settings>Registration>Register Handset.
   • If the handset LCD screen prompts "Press base page 2s then press OK", long press on the base station till the registration LED slow flashes. Then press the OK soft key on the handset, select Register Handset.
2. Select the desired base and press the OK soft key. The handset begins searching the base.
3. Press the OK soft key after searching a base successfully.
4. Enter the base PIN (default: 0000), and then press the DONE soft key to complete registration.

Take note that after the success of registration, the handset LCD screen prompts "Handset subscribed". If the handset LCD screen prompts "Searching for Base", please check that the base station is powered on.

Once handset registration is complete follow these steps to access the web user interface:

1. Press the OKAY soft key.
2. Select Status>Base.
3. Obtain IP address.
4. Open the web browser of your computer, enter the IP address into the address bar (e.g., "http://192.168.0.10" or "192.168.0.10"), and then press the Enter.
5. Enter the user name (default: admin) and password (default: admin) in the login page and click Confirm.

Account Setup

Add your Account details into the required fields: